WS3000 Automated Weigh Station

Laboratory Sample Weight Loss – Automated Precision Weighing System

Automated Precision Weighing System for Loss On Ignition

The Labfit WS3000 Weigh Station is an automated precision weighing system for your Loss on Ignition samples. The controlled environment reduces the risk of incorrectly recorded weights caused by drafts. The system is easy to use, all you have to do is place a sample carousel into the weigh station to start the weigh capture. The system weighs the initial weight of the sample crucible before prompting you to add the sample. The system includes a barcode scanner for easy sample input.

Weights are captured by 2 analytical balances with a resolution of 0.1mg and with a 42 sample capacity, all sample weights take less than 2 minutes to complete. Much faster and more accurate than weighing by hand as you have to open and the balance door, tare, add sample, close balance door in traditional weight capture set ups in laboratories. The Labfit WS3000 Weigh Station removes this inconvenience because the protective lid is only opened once when you need to add samples or remove the weighed sample from the system.

Why Choose a Labfit Weigh Station for your Catch Weights?

Well traditional weight capture rooms are not always the perfect environment for capturing your weights for Loss on Ignition analysis. The WS3000 Weigh Station is faster and less prone to interfering cross drafts associated with air-conditioning systems or poor environmental controls within the laboratory. Correct weight capture is extremely important for the correct result to be obtained from any analytical instruments with very detection limits. Weights are captured by 2 analytical balances with a resolution of 0.1mg and with a 42 sample capacity, all sample weights take less than 2 minutes to complete. Much faster and more accurate than weighing by hand as you have to open and the balance door, tare, add sample, close balance door in traditional weight capture set ups in laboratories. The Labfit WS3000 Weigh Station removes this inconvenience because the protective lid is only opened once when you need to add samples or remove the weighed sample from the system.

Automated Loss On Ignition Weighing Solution – Precisely

The Labfit WS3000 Weigh Station is designed to accommodate your Labfit LOI4000 Loss On Ignition System or the Labfit TGA3000 Automated Thermogravimetric Analyser because it can export directly to these systems with a click of a button by just selecting the “Machine ID” that corresponds to your LOI4000 and TGA3000 system. The Labfit TGA and LOI sample carousels fit directly into weigh station removing an extra step in your weighing process. After the weights have been captured you then move the TGA – LOI sample to either the Labfit TGA3000 Automated Thermogravimetric Analyser or the LOI4000 Robotic Loss On Ignition systems ready for analysis. The weighing environment is stable with no drafts or outside interference affecting the weights being captured by the balances.

Your XRF Flux Weighing Solution

The Labfit WS3000 Weigh Station has an extra weighing mode for XRF Flux and the XRF bead making process. The sample carousel holds a total of 36 samples and is designed to suit the Platinum crucibles used in the XRF bead making process. The weigh station captures and records the initial weigh if the crucible, the sample weigh and the flux weight. Once these weights have been recorded the weights can then be exported to your LIMS system for further laboratory processes. The weigh station will weigh all 36 samples in under 2 minutes for each weight cycle.